IROS 2020 论文列表

Backhoe loads sediment onto the bed of dump trucks during earthmoving work. The prediction of backhoe loading time is essential for ensuring safe cooperation between the backhoe and dump trucks. However, it is difficult to predict the instant at which the backhoe is ready to load sediment, because of the similarity in motions observed during gathering sediment. Moreover, since operators have different skill levels, the prediction requires a unique model for each operator. In this study, we attempt to predict the instant at which the backhoe is ready to load sediment into the dump truck. For this purpose, the beta-process hidden Markov model (BP-HMM) is employed to build a backhoe motion model for a specific operator. Time series data of backhoe loading motions for crushed rocks and wood chips, which were measured using 6-axis inertial measurement unit (IMU) sensors equipped at the cab, boom, and arm of the backhoe, were used for modeling with the BP-HMM. Several primitive motions of the backhoe, which occur at the completion of preparation before the loading process begins, were discovered as a result of the motion modeling based on the BP-HMM. We developed the prediction of the instant using three primitive motions. At best, the proposed method could predict the instant with a probability of 67% and 100%, at 6.0 s and 0.7 s before the loading motions began, respectively. This phased prediction can be used to reduce the idle time and risk for dump trucks during earthmoving work with the backhoe.

Prediction of the human behaviour is essential for allowing an efficient human-robot collaboration. This was confirmed recently showing how scheduling approaches can significantly increase the productivity of a robotic cell by planning the robotic actions in a way as much as possible compliant with the human predicted behaviour. This work proposes an innovative approach for human activity prediction, exploiting both a-priori information and knowledge revealed during operation. The resulting approach is proved to achieve good performance through both off-line simulated sequences and in a realistic co-assembly involving a human operator and a dual arm collaborative robot.

We study for the first time the verification problem on learning-enabled state estimation systems for robotics, which use Bayes filter for localisation, and use deep neural network to process sensory input into observations for the Bayes filter. Specifically, we are interested in a robustness property of the systems: given a certain ability to an adversary for it to attack the neural network without being noticed, whether or not the state estimation system is able to function with only minor loss of localisation precision? For verification purposes, we reduce the state estimation systems to a novel class of labelled transition systems with payoffs and partial order relations, and formally express the robustness property as a constrained optimisation objective. Based on this, practical verification algorithms are developed. As a major case study, we work with a real-world dynamic tracking system that uses a Kalman filter (a special case of the Bayes filter) to localise and track a ground vehicle. Its perception system, based on convolutional neural networks, processes a high-resolution Wide Area Motion Imagery (WAMI) data stream. Experimental results show that our algorithms can not only verify the robustness of the WAMI tracking system but also provide useful counterexamples.

Geometric primitives are a compact and versatile representation of the environment and the objects within. From a motion planning perspective, the geometric structure can be leveraged in order to implement potentially faster and smoother motion control algorithms than it has been possible with grid-based occupancy maps so far. In this paper, we introduce a novel perception pipeline that efficiently processes the point cloud obtained from an RGB-D sensor in order to produce a floor-projected 2D map in the field-of-view of the robot where obstacles are represented as polygons rather than cells. These polygons can then be processed by path planning algorithms and obstacle avoidance controllers. Our pipeline includes a ground floor plane detector that performs significantly faster than other contemporary solutions and a grid segmentation algorithm that uses image processing techniques to identify the contours of obstacles in order to convert them to polygons. We demonstrate the performance of our approach in experiments with a wheeled and a humanoid robot and show that our polygonal perception pipeline works robustly even in the presence of the disturbances caused by the shaking of a walking robot.

In view of the difficulty in reconstructing object details in point cloud completion, we propose a shape prior learning method for object completion. The shape priors include geometric information in both complete and the partial point clouds. We design a feature alignment strategy to learn the shape prior from complete points, and a coarse to fine strategy to incorporate partial prior in the fine stage. To learn the complete objects prior, we first train a point cloud auto-encoder to extract the latent embeddings from complete points. Then we learn a mapping to transfer the point features from partial points to that of the complete points by optimizing feature alignment losses. The feature alignment losses consist of a L2 distance and an adversarial loss obtained by Maximum Mean Discrepancy Generative Adversarial Network (MMD-GAN). The L2 distance optimizes the partial features towards the complete ones in the feature space, and MMD-GAN decreases the statistical distance of two point features in a Reproducing Kernel Hilbert Space. We achieve state-of-the-art performances on the point cloud completion task. Our code is available at https://github.com/xiaogangw/point-cloud-completion-shape-prior.

Reinforcement Learning (RL), among other learning-based methods, represents powerful tools to solve complex robotic tasks (e.g., actuation, manipulation, navigation, etc.), with the need for real-world data to train these systems as one of its most important limitations. The use of simulators is one way to address this issue, yet knowledge acquired in simulations does not work directly in the real-world, which is known as the sim-to-real transfer problem. While previous works focus on the nature of the images used as observations (e.g., textures and lighting), which has proven useful for a sim-to-sim transfer, they neglect other concerns regarding said observations, such as precise geometrical meanings, failing at robot-to-robot, and thus in sim-to-real transfers. We propose a method that learns on an observation space constructed by point clouds and environment randomization, generalizing among robots and simulators to achieve sim-to-real, while also addressing partial observability. We demonstrate the benefits of our methodology on the point goal navigation task, in which our method proves to be highly unaffected to unseen scenarios produced by robot-to-robot transfer, outperforms image-based baselines in robot-randomized experiments, and presents high performances in sim-to-sim conditions. Finally, we perform several experiments to validate the sim-to-real transfer to a physical domestic robot platform, confirming the out-of-the-box performance of our system.

We present the design of an active two-phase finger for mechanically mediated dexterous manipulation. The finger enables re-orientation of a grasped object by using a pneumatic braking mechanism to transition between free-rotating and fixed (i.e., braked) phases. Our design allows controlled high-bandwidth (5 Hz) phase transitions independent of the grasping force for manipulation of a variety of objects. Moreover, its thin profile (1 cm) facilitates picking and placing in clutter. Finally, the design features a sensor for measuring fingertip rotation to support feedback control. We experimentally characterize the finger's load handling capacity in the brake phase and rotational resistance in the free phase. We also demonstrate several pick-and-place manipulations common to industrial and laboratory automation settings that are simplified by our design.

Simultaneous Localization and Mapping (SLAM) is considered a mature research field with numerous applications and publicly available open-source systems. Despite this maturity, existing SLAM systems often rely on ad-hoc implementations or are tailored to predefined sensor setups. In this work, we tackle these issues, proposing a novel unified SLAM architecture specifically designed to standardize the SLAM problem and to address heterogeneous sensor configurations. Thanks to its modularity and design patterns, the presented framework is easy to extend, maximizes code reuse and improves computational efficiency. We show in our experiments with a variety of typical sensor configurations that these advantages come without compromising state-of-the-art SLAM performance. The result demonstrates the architecture's relevance for facilitating further research in (multi-sensor) SLAM and its transfer into practical applications.

General-purpose trajectory planning algorithms for automated driving utilize complex reward functions to perform a combined optimization of strategic, behavioral, and kinematic features. The specification and tuning of a single reward function is a tedious task and does not generalize over a large set of traffic situations. Deep learning approaches based on path integral inverse reinforcement learning have been successfully applied to predict local situation-dependent reward functions using features of a set of sampled driving policies. Sample-based trajectory planning algorithms are able to approximate a spatio-temporal subspace of feasible driving policies that can be used to encode the context of a situation. However, the interaction with dynamic objects requires an extended planning horizon, which depends on sequential context modeling. In this work, we are concerned with the sequential reward prediction over an extended time horizon. We present a neural network architecture that uses a policy attention mechanism to generate a low-dimensional context vector by concentrating on trajectories with a human-like driving style. Apart from this, we propose a temporal attention mechanism to identify context switches and allow for stable adaptation of rewards. We evaluate our results on complex simulated driving situations, including other moving vehicles. Our evaluation shows that our policy attention mechanism learns to focus on collision-free policies in the configuration space. Furthermore, the temporal attention mechanism learns persistent interaction with other vehicles over an extended planning horizon.

This paper addresses the problem of planning for visibility-based pursuit evasion, in contexts where the pursuer robot may experience some positioning errors as it moves in search of the evader. Specifically, we consider the case in which a pursuer with an omnidirectional sensor searches a known environment to locate an evader that may move arbitrarily quickly. Known algorithms for this problem are based on decompositions of the environment into regions, followed by a search for a sequence of those regions through which the pursuer should pass. In this paper, we note that these regions can be arbitrarily small, and thus that the movement accuracy required of the pursuer may be arbitrarily high. To resolve this limitation, we introduce the notion of an ε-robust solution strategy, in which ε is an upper bound on the positioning error that the pursuer may experience. We establish sufficient conditions under which a solution strategy is ε-robust, and introduce an algorithm that determines, for a given environment, the largest value of ε for which a solution strategy satisfying those sufficient conditions exists. We de-scribe an implementation and show simulated results demonstrating the effectiveness of the approach.

In the present paper, we propose an extension of the Deep Planning Network (PlaNet), also referred to as PlaNet of the Bayesians (PlaNet-Bayes). There has been a growing demand in model predictive control (MPC) in partially observable environments in which complete information is unavailable because of, for example, lack of expensive sensors. PlaNet is a promising solution to realize such latent MPC, as it is used to train state-space models via model-based reinforcement learning (MBRL) and to conduct planning in the latent space. However, recent state-of-the-art strategies mentioned in MBRR literature, such as involving uncertainty into training and planning, have not been considered, significantly suppressing the training performance. The proposed extension is to make PlaNet uncertainty-aware on the basis of Bayesian inference, in which both model and action uncertainty are incorporated. Uncertainty in latent models is represented using a neural network ensemble to approximately infer model posteriors. The ensemble of optimal action candidates is also employed to capture multimodal uncertainty in the optimality. The concept of the action ensemble relies on a general variational inference MPC (VI-MPC) framework and its instance, probabilistic action ensemble with trajectory sampling (PaETS). In this paper, we extend VI-MPC and PaETS, which have been originally introduced in previous literature, to address partially observable cases. We experimentally compare the performances on continuous control tasks, and conclude that our method can consistently improve the asymptotic performance compared with PlaNet.

We are interested in understanding whether retrieval-based localization approaches are good enough in the context of self-driving vehicles. Towards this goal, we introduce Pit30M, a new image and LiDAR dataset with over 30 million frames, which is 10 to 100 times larger than those used in previous work. Pit30M is captured under diverse conditions (i.e., season, weather, time of the day, traffic), and provides accurate localization ground truth. We also automatically annotate our dataset with historical weather and astronomical data, as well as with image and LiDAR semantic segmentation as a proxy measure for occlusion. We benchmark multiple existing methods for image and LiDAR retrieval and, in the process, introduce a simple, yet effective convolutional network-based LiDAR retrieval method that is competitive with the state of the art. Our work provides, for the first time, a benchmark for sub-metre retrieval-based localization at city scale.The dataset, additional experimental results, as well as more information about the sensors, calibration, and metadata, are available on the project website: https://uber.com/atg/datasets/pit30m.

Mobile robotic platforms require a precise understanding about other agents in their surroundings as well as their respective motion in order to operate safely. Scene flow in combination with object detection can be used to achieve this understanding. Together, they provide valuable cues for behavior prediction of other agents and thus ultimately are a good basis for the ego-vehicle's behavior planning algorithms. Traditionally, scene flow estimation and object detection are handled by separate deep networks requiring immense computational resources. In this work, we propose PillarFlowNet, a novel method for simultaneous LiDAR scene flow estimation and object detection with low latency and high precision based on a single network. In our experiments on the KITTI dataset, PillarFlowNet achieves a 16.3 percentage points higher average precision score as well as a 21.4 % reduction in average endpoint error for scene flow compared to the state-of-the-art in multitask LiDAR object detection and scene flow estimation. Furthermore, our method is significantly faster than previous methods, making it the first to be applicable for real-time systems.

In autonomous driving, accurately estimating the state of surrounding obstacles is critical for safe and robust path planning. However, this perception task is difficult, particularly for generic obstacles/objects, due to appearance and occlusion changes. To tackle this problem, we propose an end-to-end deep learning framework for LIDAR-based flow estimation in bird's eye view (BeV). Our method takes consecutive point cloud pairs as input and produces a 2-D BeV flow grid describing the dynamic state of each cell. The experimental results show that the proposed method not only estimates 2-D BeV flow accurately but also improves tracking performance of both dynamic and static objects.

Dexterous manipulation of objects in virtual environments with our bare hands, by using only a depth sensor and a state-of-the-art 3D hand pose estimator (HPE), is challenging. While virtual environments are ruled by physics, e.g. object weights and surface frictions, the absence of force feedback makes the task challenging, as even slight inaccuracies on finger tips or contact points from HPE may make the interactions fail. Prior arts simply generate contact forces in the direction of the fingers' closures, when finger joints penetrate virtual objects. Although useful for simple grasping scenarios, they cannot be applied to dexterous manipulations such as inhand manipulation. Existing reinforcement learning (RL) and imitation learning (IL) approaches train agents that learn skills by using task-specific rewards, without considering any online user input. In this work, we propose to learn a model that maps noisy input hand poses to target virtual poses, which introduces the needed contacts to accomplish the tasks on a physics simulator. The agent is trained in a residual setting by using a model-free hybrid RL+IL approach. A 3D hand pose estimation reward is introduced leading to an improvement on HPE accuracy when the physics-guided corrected target poses are remapped to the input space. As the model corrects HPE errors by applying minor but crucial joint displacements for contacts, this helps to keep the generated motion visually close to the user input. Since HPE sequences performing successful virtual interactions do not exist, a data generation scheme to train and evaluate the system is proposed. We test our framework in two applications that use hand pose estimates for dexterous manipulations: hand-object interactions in VR and hand-object motion reconstruction in-the-wild. Experiments show that the proposed method outperforms various RL/IL baselines and the simple prior art of enforcing hand closure, both in task success and hand pose accuracy. Show More

During robot-assisted therapy of hemiplegic patients, interaction with the patient must be intrinsically safe. Straight-forward collision avoidance solutions can provide this safety requirement with conservative margins. These margins heavily reduce the robot's workspace and make interaction with the patient's unguided body parts impossible. However, interaction with the own body is highly beneficial from a therapeutic point of view. We tackle this problem by combining haptic rendering techniques with classical computer vision methods. Our proposed solution consists of a pipeline that builds collision objects from point clouds in real-time and a controller that renders haptic interaction. The raw sensor data is processed to overcome noise and occlusion problems. Our proposed approach is validated on the 6 DoF exoskeleton ANYexo for direct impacts, sliding scenarios, and dynamic collision surfaces. The results show that this method has the potential to successfully prevent collisions and allow haptic interaction for highly dynamic environments. We believe that this work significantly adds to the usability of current exoskeletons by enabling virtual haptic interaction with the patient's body parts in human-robot therapy.

Personalized online machine learning allows a very accurate modelling of individual behavior and demands. In particular, a system that dynamically adapts during runtime can initiate a continuous collaboration with its user where both alternately adjust to each other to maximize the system's utility. However, in application scenarios based on supervised learning it is often unclear how to obtain the required ground truth for such dynamic systems. In this paper, we focus on applications where a real-time classification of sequential data is crucial. Concretely, we propose to adapt an online personalized model solely based on pseudo-ground-truth information which is provided by another machine learning model. This model has the advantage to classify sequences in retrospective with a small delay and thus is able to achieve a higher performance than real-time systems. In particular, it is a pre-trained offline model, which means that no ground-truth information is necessary during runtime. We apply the proposal on the task of online action classification, for which the benefits of personalization have been recently emphasized.

Persistent surveillance with aerial vehicles (drones) subject to connectivity and power constraints is a relatively uncharted domain of research. To reduce the complexity of multi-drone motion planning, most state-of-the-art solutions ignore network connectivity and assume unlimited battery power. Motivated by this and advances in optimization and constraint satisfaction techniques, we introduce a new persistent surveillance motion planning problem for multiple drones that incorporates connectivity and power consumption constraints. We use a recently developed constrained optimization tool (Satisfiability Modulo Convex Optimization (SMC)) that has the expressivity needed for this problem. We show how to express the new persistent surveillance problem in the SMC framework. Our analysis of the formulation based on a set of simulation experiments illustrates that we can generate the desired motion planning solution within a couple of minutes for small teams of drones (up to 5) confined to a 7 × 7 × 1 grid-space.

This paper characterizes an algorithm that estimates searcher skill level to support planning for search activities involving heterogeneous robot and human/robot teams. Specifically, we use Monte-Carlo simulations to determine the empirical accuracy of the estimator, to assess the quality of its predicted distribution (nonparametric) of agent skill levels, and the convergence rate of the estimate. The simulation study suggests that a single challenging search task can be used to estimate searcher skill within about 10%; however, the quality of the estimate is higher when searcher skill is high.