CVPR 2026 Papers

All-in-one image restoration (AiOIR) methods have made remarkable progress in handling diverse degradations. However, their performance often deteriorates when the test distribution deviates from the training distribution. Exploring test-time adaptation for AiOIR is therefore crucial. To adapt a pre-trained AiOIR model to unseen degradation distributions without access to source data or retraining, two key challenges must be addressed: designing reliable pseudo-supervision and stabilizing adaptation. Observing that multiple degraded versions of the same scene should map to a consistent clean image, we propose Degradation-Consistent Test-Time Adaptation (DCTTA). DCTTA comprises three core components: (1) test-time redegradation generation, which leverages a diffusion-based generator to construct pseudo degraded-clean pairs for distribution alignment; (2) degradation-guided image restoration, which enforces domain adaptation via self-supervised consistency loss; and (3) test-time important parameter selection, which selectively updates degradation-sensitive parameters to ensure stable adaptation while preserving pre-trained knowledge. Extensive experiments across multiple tasks and challenging domain shifts demonstrate that DCTTA consistently outperforms state-of-the-art AiOIR baselines, achieving up to +4.57 dB PSNR improvement on the Rain100H dataset.

The life of a photo begins with photons striking the sensor, whose signals are passed through a sophisticated image signal processing (ISP) pipeline to produce a display-referred image. However, such images are no longer faithful to the incident light, being compressed in dynamic range and stylized by subjective preferences. In contrast, RAW images record direct sensor signals before non-linear tone mapping. After camera response curve correction and demosaicing, they can be converted into linear images, which are scene-referred representations that directly reflect true irradiance and are invariant to sensor-specific factors. Since image sensors have better dynamic range and bit depth, linear images contain richer information than display-referred ones, leaving users more room for editing during post-processing. Despite this advantage, current generative models mainly synthesize display-referred images, which inherently limits downstream editing. In this paper, we address the task of text-to-linear-image generation: synthesizing a high-quality, scene-referred linear image that preserves full dynamic range, conditioned on a text prompt, for professional post-processing. Generating linear images is challenging, as pre-trained VAEs in latent diffusion models struggle to simultaneously preserve extreme highlights and shadows due to the higher dynamic range and bit depth. To this end, we represent a linear image as a sequence of exposure brackets, each capturing a specific portion of the dynamic range, and propose a DiT-based flow-matching architecture for text-conditioned exposure bracket generation. We further demonstrate downstream applications including text-guided linear image editing and structure-conditioned generation via ControlNet.

Vector images have attracted increasing attention in the field of information hiding in recent years due to their scalability and structural properties. However, existing steganographic methods for vector images often introduce noticeable modifications to the files themselves, resulting in potential security risks and limited embedding capacity. Motivated by recent advances in diffusion models and image generative steganography, we propose GVIS, a novel Generative Vector Image Steganography framework. GVIS deterministically generates raster images using diffusion models, which are subsequently vectorized into vector images. On the sender side, we design a lightweight overlap detection algorithm to identify cubic Bezier curve control points suitable for data embedding, which enables the secret information to be encoded into the coordinate parameters of these control points. Then, the receiver can use the pre-shared settings to reconstruct the generation process and accurate message extraction by difference. Extensive theoretical analysis and experimental results demonstrate that GVIS achieves high-capacity, high-accuracy, secure, and training-free steganography. To the best of our knowledge, this is the first attempt to apply generative models to vector image steganography.

Advances in diffusion-based video generation models, while significantly improving human animation, poses threats of misuse through the creation of fake videos from a specific person's photo and text prompts. Recent efforts have focused on adversarial attacks that introduce crafted perturbations to protect images from diffusion-based models. However, most existing approaches target image generation, while relatively few explicitly address image-to-video diffusion models (VDMs), and most primarily focus on UNet-based architectures. Hence, their effectiveness against Diffusion Transformer (DiT) models remains largely under-explored, as these models demonstrate improved feature retention, and stronger temporal consistency due to larger capacity and advanced attention mechanisms. In this work, we introduce Anti-I2V, a novel defense against malicious human image-to-video generation, applicable across diverse diffusion backbones. Instead of restricting noise updates to the RGB space, Anti-I2V operates in both the L*a*b* and frequency domains, improving robustness and concentrating on salient pixels. We then identify the network layers that capture the most distinct semantic features during the denoising process to design appropriate training objectives that maximize degradation of temporal coherence and generation fidelity. Through extensive validation, Anti-I2V demonstrates state-of-the-art defense performance against diverse video diffusion models, offering an effective solution to the problem.

Modern multi-label image classification models suffer from a critical reliance on spurious correlations, failing to learn the underlying causal mechanisms. Many causality-inspired methods are impractical, demanding box-level supervision that is rarely available in real-world datasets. Others rely on static confounder dictionaries, which are inherently inflexible and fail to capture complex biases or adapt to feature space changes during training. To address this, we present prototype-based causal intervention (ProCI), a novel framework that approximates the backdoor adjustment using only image-level supervision. It models confounders as learnable contextual prototypes engineered to represent class-wise co-occurring bias. These prototypes are learned dynamically within a stable memory and leveraged to construct sample-specific bias vectors for an adaptive feature adjustment, effectively counteracting spurious correlations. Experiments on MS-COCO, Pascal VOC, COCO-Stuff, and the challenging Sewer-ML dataset validate our approach. ProCI achieves competitive performance on standard benchmarks while setting a new state-of-the-art on the highly-confounded Sewer-ML. It outperforms the previous best model by a remarkable +5.44 points on the F2-CIW metric. These results demonstrate the effectiveness of our approach in mitigating complex real-world biases using only image-level supervision.

Low-light image enhancement (LLIE) aims to restore natural visibility, color fidelity, and structural detail under severe illumination degradation. State-of-the-art (SOTA) LLIE techniques often rely on large models and multi-stage training, limiting practicality for edge deployment. Moreover, their dependence on a single color space introduces instability and visible exposure or color artifacts.To address these, we propose Multinex, an ultra-lightweight structured framework that integrates multiple fine-grained representations within a principled Retinex residual formulation. It decomposes an image into illumination and color prior stacks derived from distinct analytic representations, and learns to fuse these representations into luminance and reflectance adjustments required to correct exposure. By prioritizing enhancement over reconstruction and exploiting lightweight neural operations, Multinex significantly reduces computational cost, exemplified by its lightweight (45K parameters) and nano (0.7K parameters) versions. Extensive benchmarks show that all lightweight variants significantly outperform their corresponding lightweight SOTA models, and reach comparable performance to heavy models. Paper page available at https://albrateanu.github.io/multinex.

Diffusion-based stylization has advanced significantly, yet existing methods are limited to color-driven transformations, neglecting complex semantics and material details. We introduce StyleExpert, a semantic-aware framework based on Mixture of Experts (MoE).Our framework employs a unified style encoder, trained on our large-scale dataset of content-style-stylized triplets, to embed diverse styles into a consistent latent space. This embedding is then used to condition a similarity-aware gating mechanism, which dynamically routes styles to specialized experts within the MoE architecture. Leveraging this MoE architecture, our method adeptly handles diverse styles spanning multiple semantic levels, from shallow textures to deep semantics. Extensive experiments show that StyleExpert outperforms existing approaches in preserving semantics and material details, while generalizing to unseen styles.

Diffusion-based image-to-image (I2I) translation excels in high-fidelity generation but suffers from slow sampling in state-of-the-art Diffusion Bridge Models (DBMs), often requiring dozens of function evaluations (NFEs). We introduce DBMSolver, a training-free sampler that exploits the semi-linear structure of DBM's underlying SDE and ODE via exponential integrators, yielding highly-efficient 1st- and 2nd-order solutions. This reduces NFEs by up to 5X while boosting quality (e.g., FID drops 53% on DIODE at 20 NFEs vs. 2nd-order baseline). Experiments on inpainting, stylization, and semantics-to-image tasks across resolutions up to 256x256 show DBMSolver sets new SOTA efficiency-quality tradeoffs, enabling real-world applicability. Our code is publicly available at https://github.com/snumprlab/dbmsolver.

Concept erasure is extensively utilized in image generation to prevent text-to-image models from generating undesired content. Existing methods can effectively erase narrow concepts that are specific and concrete, such as distinct intellectual properties (e.g. Pikachu) or recognizable characters (e.g. Elon Musk). However, their performance degrades on broad concepts such as "sexual" or "violent", whose wide scope and multi-faceted nature make them difficult to erase reliably.To overcome this limitation, we exploit the model's intrinsic embedding geometry to identify latent embeddings that encode a given concept. By clustering these embeddings, we derive a set of concept prototypes that summarize the model's internal representations of the concept, and employ them as negative conditioning signals during inference to achieve precise and reliable erasure. Extensive experiments across multiple benchmarks show that our approach achieves substantially more reliable removal of broad concepts while preserving overall image quality, marking a step towards safer and more controllable image generation.

We present FlexTraj, a framework for image-to-video generation with flexible point trajectory control. FlexTraj introduces a unified point-based representation that encodes point with a temporally consistent trajectory ID, a segmentation ID, and an optional color channel for appearance cues, enabling both dense and sparse trajectory control. Instead of injecting trajectory conditions into the video generator through token concatenation or ControlNet, FlexTraj employs an efficient sequence-concatenation scheme that achieves faster convergence, stronger controllability, and efficient inference, while maintaining robustness under unaligned conditions. To train such a unified point trajectory-controlled video generator, FlexTraj adopts an annealing training strategy that gradually reduces reliance on complete supervision and aligned condition. Experimental results demonstrate that FlexTraj enables multi-granularity, alignment-agnostic trajectory control for video generation, supporting various applications such as motion cloning, drag-based image-to-video, motion interpolation, camera redirection, flexible action control and mesh animations.

In computational pathology, understanding and generation have evolved along disparate paths: advanced understanding models already exhibit diagnostic-level competence, whereas generative models largely simulate pixels. Progress remains hindered by three coupled factors: the scarcity of large, high-quality image-text corpora; the lack of precise, fine-grained semantic control, which forces reliance on non-semantic cues; and terminological heterogeneity, where diverse phrasings for the same diagnostic concept impede reliable text conditioning. We introduce UniPath, a semantics-driven pathology image generation framework that leverages mature diagnostic understanding to enable controllable generation. UniPath implements Multi-Stream Control: a Raw-Text stream; a High-Level Semantics stream that uses learnable queries to a frozen pathology MLLM to distill paraphrase-robust Diagnostic Semantic Tokens and to expand prompts into diagnosis-aware attribute bundles; and a Prototype stream that affords component-level morphological control via a prototype bank. On the data front, we curate a 2.65M image-text corpus and a finely annotated, high-quality 68K subset to alleviate data scarcity. For a comprehensive assessment, we establish a four-tier evaluation hierarchy tailored to pathology. Extensive experiments demonstrate UniPath's SOTA performance, including a Patho-FID of 80.9 (51% better than the second-best) and fine-grained semantic control achieving 98.7% of the real-image. The dataset and code can be obtained from https://github.com/Hanminghao/UniPath.

Image fusion aims to integrate complementary information from multiple source images to produce a more informative and visually consistent representation, benefiting both human perception and downstream vision tasks. Despite recent progress, most existing fusion methods are designed for specific tasks (i.e., multi-modal, multi-exposure, or multi-focus fusion) and struggle to effectively preserve source information during the fusion process. This limitation primarily arises from task-specific architectures and the degradation of source information caused by deep-layer propagation. To overcome these issues, we propose UniFusion, a unified image fusion framework designed to achieve cross-task generalization. First, leveraging DINOv3 for modality-consistent feature extraction, UniFusion establishes a shared semantic space for diverse inputs. Second, to preserve the understanding of each source image, we introduce a reconstruction-alignment loss to maintain consistency between fused outputs and inputs. Finally, we employ a bilevel optimization strategy to decouple and jointly optimize reconstruction and fusion objectives, effectively balancing their coupling relationship and ensuring smooth convergence. Extensive experiments across multiple fusion tasks demonstrate UniFusion's superior visual quality, generalization ability, and adaptability to real-world scenarios.

Next-scale prediction paradigm visual autoregressive (VAR) models have demonstrated significant potential for image super-resolution. However, their practical application is constrained by a rigid, size-specific design. This limitation stems from their reliance on memorizing fixed, absolute scaling schedules, which necessitates a distinct model for each target resolution. We introduce DVAR, a Dynamic Visual AutoRegressive framework that overcomes this fundamental bottleneck. Instead of memorizing these rigid schedules, DVAR learns a canonical scaling dynamic. This dynamic effectively decouples the logic of relative scaling from the absolute target size, thereby preserving a single set of proportions between generative steps that can be applied uniformly to any size. Furthermore, we introduce a dynamic sampling scheduler to mitigate the teacher-forcing problem with negligible computational overhead. By leveraging the geometric proximity of visual tokens in the codebook, it efficiently simulates the model's predictive error distribution to bridge the training-inference gap. To our knowledge, DVAR is the first framework to grant VAR models size-flexibility, breaking their one-to-one dependency on a fixed resolution. Extensive evaluations demonstrate that DVAR achieves superior visual quality over existing Real-ISR methods, proving that a flexible, purely autoregressive approach is a viable path to state-of-the-art image super-resolution. Code is available at https://github.com/YuZheng9/DVAR.

Deformable image registration (DIR) remains a fundamental yet challenging problem in medical image analysis, largely due to the prohibitively high-dimensional deformation space of dense displacement fields and the scarcity of voxel-level supervision. Existing reinforcement learning frameworks often project this space into coarse, low-dimensional representations, limiting their ability to capture spatially variant deformations. We propose MorphSeek, a fine-grained representation-level policy optimization paradigm that reformulates DIR as a spatially continuous optimization process in the latent feature space. MorphSeek introduces a stochastic Gaussian policy head atop the encoder to model a distribution over latent features, facilitating efficient exploration and coarse-to-fine refinement. The framework integrates unsupervised warm-up with weakly supervised fine-tuning through Group Relative Policy Optimization, where multi-trajectory sampling stabilizes training and improves label efficiency. Across three 3D registration benchmarks (OASIS brain MRI, LiTS liver CT, and Abdomen MR-CT), MorphSeek achieves consistent Dice improvements over competitive baselines while maintaining high label efficiency with minimal parameter cost and low step-level latency overhead. Beyond optimizer specifics, MorphSeek advances a representation-level policy learning paradigm that achieves spatially coherent and data-efficient deformation optimization, offering a principled, backbone-agnostic, and optimizer-agnostic solution for scalable visual alignment in high-dimensional settings.

Diffusion-based text-to-image (T2I) models have made remarkable progress in generating photorealistic and semantically rich images. However, when the target concepts lie in low-density regions of the training distribution, these models often produce semantically misaligned or structurally inconsistent results. This limitation arises from the long-tailed nature of text-image datasets, where rare concepts or editing instructions are underrepresented. To address this, we introduce Adaptive Auxiliary Prompt Blending (AAPB) -- a unified framework that stabilizes the diffusion process in low-density regions. AAPB leverages auxiliary anchor prompts to provide semantic support in rare concept generation and structural support in image editing, ensuring faithful guidance toward the target prompt. Unlike prior heuristic prompt alternation methods, AAPB derives a closed-form adaptive coefficient that optimally balances the influence between the auxiliary anchor and the target prompt at each diffusion step. Grounded in Tweedie's identity, our formulation provides a principled and training-free framework for adaptive prompt blending, ensuring stable and target-faithful generation. We demonstrate the effectiveness of adaptive interpolation over fixed interpolation through controlled experiments and empirically show consistent improvements on the RareBench and FlowEdit datasets, achieving superior semantic accuracy and structural fidelity compared to prior training-free baselines.

Recent pseudo-bag augmentation methods for Multiple Instance Learning (MIL)-based Whole Slide Image (WSI) classification sample instances from a limited number of bags, resulting in constrained diversity. To address this issue, we propose Contrastive Cross-Bag Augmentation (C2Aug) to sample instances from all bags with the same class to increase the diversity of pseudo-bags. However, introducing new instances into the pseudo-bag increases the number of critical instances (e.g., tumor instances). This increase results in a reduced occurrence of pseudo-bags containing few critical instances, thereby limiting model performance, particularly on test slides with small tumor areas. To address this, we introduce a bag-level and group-level contrastive learning framework to enhance the discrimination of features with distinct semantic meanings, thereby improving model performance. C2Aug samples instances with consistent bag-level labels across the entire dataset, which simultaneously enhances the diversity of pseudo-bags and mitigates label noise. Experimental results demonstrate that C2Aug consistently outperforms state-of-the-art approaches across multiple evaluation metrics. Our code is publicly available at: https://github.com/weiaicunzai/mixup.

Automatic residential floorplan generation has long been a central challenge bridging architecture and computer graphics, aiming to make spatial design more efficient and accessible. While early methods based on constraint satisfaction or combinatorial optimization ensure feasibility, they lack diversity and flexibility. Recent generative models achieve promising results but struggle to generalize across heterogeneous conditional tasks, such as generation from site boundaries, room adjacency graphs, or partial layouts, due to their suboptimal representations. To address this gap, we introduce Floorplan Markup Language (FML), a general representation that encodes floorplan information within a single structured grammar, which casts the entire floorplan generation problem into a next token prediction task. Leveraging FML, we develop a transformer-based generative model, Floorplan Markup Language Model (FMLM), capable of producing high-fidelity and functional floorplans under diverse conditions. Comprehensive experiments on the RPLAN dataset demonstrate that FMLM, despite being a single model, surpasses the previous task-specific state-of-the-art methods.

Capturing high-quality images from only a few detected photons is a fundamental challenge in computational imaging. Single-photon avalanche diode (SPAD) sensors promise high-quality imaging in regimes where conventional cameras fail, but raw quanta frames contain only sparse, noisy, binary photon detections. Recovering a coherent image from a burst of such frames requires handling alignment, denoising, and demosaicing (for color) under noise statistics far outside those assumed by standard restoration pipelines or modern generative models. We present an approach that adapts large text-to-image latent diffusion models to the photon-limited domain of quanta burst imaging. Our method leverages the structural and semantic priors of internet-scale diffusion models while introducing mechanisms to handle Bernoulli photon statistics. By integrating latent-space restoration with burst-level spatio-temporal reasoning, our approach produces reconstructions that are both photometrically faithful and perceptually pleasing, even under high-speed motion. We evaluate the method on synthetic benchmarks and new real-world datasets, including the first color SPAD burst dataset and a challenging Deforming (XD) video benchmark. Across all settings, the approach substantially improves perceptual quality over classical and modern learning-based baselines, demonstrating the promise of adapting large generative priors to extreme photon-limited sensing. Code at https://github.com/Aryan-Garg/gQIR.

Text-to-image generation has advanced rapidly, yet it still struggles to capture the nuanced user preferences. Existing approaches typically rely on multimodal large language models to infer user preferences, but the derived prompts or latent codes rarely reflect them faithfully, leading to suboptimal personalization. We present Premier, a novel preference modulation framework for personalized image generation. Premier represents each user's preference as a learnable embedding and introduces a preference adapter that fuses the user embedding with the text prompt. To enable accurate and fine-grained preference control, the fused preference embedding is further used to modulate the generative process. To enhance the distinctness of individual preference and improve alignment between outputs and user-specific styles, we incorporate a dispersion loss that enforces separation among user embeddings. When user data are scarce, new users are represented as linear combinations of existing preference embeddings learned during training, enabling effective generalization. Experiments show that Premier outperforms prior methods under the same history length, achieving stronger preference alignment and superior performance on text consistency, ViPer proxy metrics, and expert evaluations.